J-1200切斷機   CJ-1200 tire cutter

用途：

可將各種橡膠塊、條任意切斷。適應于各種斜角輪胎、鋼絲輪胎、橡膠條等橡膠件的切斷。

結構與原理
該機由電機、液壓系統、工作油缸、一對刀片、機架及轉動機構等組成。
其基本原理為：電機帶動液壓系統和油缸，將輪胎置于兩刀片之間，先由鎖緊油缸工作使鎖緊臂轉動，扣緊兩刀片之間的輪胎，然后剪切油缸工作使動刀片旋轉，促使兩刀片形成剪切之勢，達到剪切之效果。

特點

該設備剪切刀大，剪切效果好，剪切速度快，能耗低，體積小，移動十分方便，由于采用了液壓系統，故操作方便，安全。

Use:more than 800 tires need this kind of cutting machine, after cutting can break in the broken tire machine.

The cutter machine is made up of motor, hydraulic system, oil cylinder, one pair of blade, frame and rotating body etc.

The basic principle is: motor drive hydraulic system and the cylinder, place the tire between two lock arm, fasten the tire and shear cylinders work to move, two blades rotating forming shear, achieve the effect of shear.

Feature:

This equipment, good shear effect,shearing speed, low energy consumption, small volume, convenient, because use the hydraulic system, easy operation and safety.

Mechanical description: the tires more than 800 need to cut,and cut into four pieces in general.the size of piece is 200-500mm

技術參數